Hhd Smile Series S30 Automatic 30 Eggs Incubator
Nanchang Howard Technology Co., Ltd.- Port：Ningbo, China
- Production Capacity：10000 Sets Per Month
- Payment Terms：L/C, T/T
- Type：Automatic Hatching Machine
- Application：Chicken
- Power Source：Electric
- Computerized：Computerized
- Certification：CE
- Condition：New
Base Info
- Model NO.：S30
- Colour：Red Base +Transparent Cover
- Material：ABS
- Egg Turning：Automatic Egg Turning
- Warranty：12 Months
- Trademark：HHD
- Transport Package：Foam Protection Inside, Carton Package Outside
- Origin：Nanchang, China
- HS Code：84362100
Description
HHD Smile series S30 automatic 30 eggs incubator
Technical Specification:
Capacity: 30 eggs
Voltage :110V/220V
Power: ≤45W,Energy saving
Product size :40*40*9CM
1pcs/1 carton box(5 Layers)
G.W.: 2.3kg N.W.:1.5kg
Packing size: 45* 48.5 * 14.5CM
Feature:
S30/S52 Innovative features:
1. The whole machine ABS raw materials production, environmental protection and durable.
2. DC fan low noise, circular arc structure is more reasonable circulation air duct.
3. Turn eggs automatically.
4. Silica gel hair hot wire (more stable, accurate, no dead Angle)
5. Design of overflow hole to prevent excessive water addition from affecting the hatching of the machine
6. The Styrofoam device improves the effect of heat preservation, moisture retention and energy saving.
7. Automatic temperature control, automatic display of current temperature.
8. Simplify buttons.
How to Use it:
Please read carefully when you get ENGLISH MANUAL to see how to use
1. Take off the layer of protective films on the observation windows
2. Test your incubator to see if it functions properly.
3. Connect the egg turner plug to the control plug inside the egg compartment.
4. Fill one or both water channels depending on local humidity levels.
5. Set the eggs with the pointy side down.
6. Close the lid and switch on the incubator.
7. Press the reset button (left green button) to reset and start the day counter from "0". (this will also rest the egg turning countdown back to 1: 59)
8. Keep an eye on the humidity reading and fill the water channels when needed. (normally every 3-4 days)
9. At day 18 you should remove the tray with the turning mechanism and place the eggs on the top of he bottom grid.
10. At the same time it is important to fill both water channels to increase the humidity. (this is very important to ensure that the eggshell are soft enough for the chicks to break through. )
Package:
*Foam Protection
*Egg Incubator x 1pcs
*Power Cord x 1pcs
*Instruction Booklet
*Humidifier
Any questions, warmly welcomed.
Technical Specification:
Capacity: 30 eggs
Voltage :110V/220V
Power: ≤45W,Energy saving
Product size :40*40*9CM
1pcs/1 carton box(5 Layers)
G.W.: 2.3kg N.W.:1.5kg
Packing size: 45* 48.5 * 14.5CM
Feature:
S30/S52 Innovative features:
1. The whole machine ABS raw materials production, environmental protection and durable.
2. DC fan low noise, circular arc structure is more reasonable circulation air duct.
3. Turn eggs automatically.
4. Silica gel hair hot wire (more stable, accurate, no dead Angle)
5. Design of overflow hole to prevent excessive water addition from affecting the hatching of the machine
6. The Styrofoam device improves the effect of heat preservation, moisture retention and energy saving.
7. Automatic temperature control, automatic display of current temperature.
8. Simplify buttons.
How to Use it:
Please read carefully when you get ENGLISH MANUAL to see how to use
1. Take off the layer of protective films on the observation windows
2. Test your incubator to see if it functions properly.
3. Connect the egg turner plug to the control plug inside the egg compartment.
4. Fill one or both water channels depending on local humidity levels.
5. Set the eggs with the pointy side down.
6. Close the lid and switch on the incubator.
7. Press the reset button (left green button) to reset and start the day counter from "0". (this will also rest the egg turning countdown back to 1: 59)
8. Keep an eye on the humidity reading and fill the water channels when needed. (normally every 3-4 days)
9. At day 18 you should remove the tray with the turning mechanism and place the eggs on the top of he bottom grid.
10. At the same time it is important to fill both water channels to increase the humidity. (this is very important to ensure that the eggshell are soft enough for the chicks to break through. )
Package:
*Foam Protection
*Egg Incubator x 1pcs
*Power Cord x 1pcs
*Instruction Booklet
*Humidifier
Any questions, warmly welcomed.